Gyroscope

  • You've just added this product to the cart:

    9DOF 3 AXIS ACCELEROMETER + GYROSCOPE + MAGNETOMETER MPU-9250

    0 out of 5

    9DOF 3 AXIS ACCELEROMETER + GYROSCOPE + MAGNETOMETER MPU-9250

    This module features the Invensense MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer from Asahi Kasei Microdevices Corporation. Hence, the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). The MPU-9250 also features an embedded temperature sensor.

    470.00
  • You've just added this product to the cart:

    GYROSCOPE MODULE WITH ANGLE UART/I2C OUTPUT GY-25 MPU6050

    0 out of 5

    GYROSCOPE MODULE WITH ANGLE UART/I2C OUTPUT GY-25 MPU6050

    GY-25 module based on the combination of an MPU6050 and an MCU in charge of compiling and processing gyroscope and acceleration data to offer a direct angle output. Communicated by UART, it is also possible to recover the raw data via I2C. A solder jumper allows to select the baudrate for the UART (9600-115200) another solder jumper allows the use of the port I2C. This module accepts a 3.3V or 5.0V VDC and its IOs are also 5.0V tolerant so it can be used directly in the 3.3V and 5.0V system and with the standard USB 3.3V and 5.0V UART adapters.

    560.00
  • You've just added this product to the cart:

    L3G4200D 3AXIS GYRO

    0 out of 5

    L3G4200D 3AXIS GYRO

    This is a breakout board for the L3G4200D. the L3G4200D is a low-power three-axis angular rate sensor able to provide unprecedented stablility of zero rate level and sensitivity over temperature and time. It includes a sensing element and an IC interface capable of providing the measured angular rate to the external world through a digital interface (I2C/SPI).

    360.00
  • You've just added this product to the cart:

    TRIPLE AXIS ACCELEROMETER & GYRO MPU-6050 BREAKOUT

    0 out of 5

    TRIPLE AXIS ACCELEROMETER & GYRO MPU-6050 BREAKOUT

    The MPU-6050 is the world’s first and only 6-axis MotionTracking devices designed for the low power, low cost, and high performance requirements of smartphones, tablets and wearable sensors.By combining a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor(DMP) capable of processing complex 9-axis MotionFusion algorithms. The parts’ integrated 9-axis MotionFusion algorithms access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor.

    200.00