-
BREAD BOARD POWER SUPPLY
compatible with 5V, 3.3V.
Input Voltage :6.5-12V (DC) or USB power.
Output voltage: 3.3V, 5V switchable.
Maximum Output Current: <700ma.
Two way independent control.
Can be switched to 0V, 3.3V, 5V.
On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads. -
DC-DC STEP UP BOOST CONVERTER 150W 10-32V INPUT TO 12-35V OUTPUT
⦁ Condition: Brand New and High Quality
⦁ Size: 65 x33 x 23.5 mm
⦁ Module Properties: BOOST /step-up
⦁ Input voltage :10-32V
⦁ Output voltage: adjustable (12-35V)
⦁ Output Current: 10A (MAX)
⦁ Input Current: 16A (MAX) (enhance heat dissipation beyond than 10A)
⦁ Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)
⦁ Easy to drive 65W 90W including dual-core notebook
⦁ With a 12V battery drive a normal 19V 3.42A notebook , module temperature about 45 degrees
⦁ Conversion efficiency: 94%( tested Input 16V out 19V ,2.5A)
⦁ Output Ripple: 2% (MAX) 20M-bandwidth
⦁ Operating Temperature: Industrial (-40 Celsius to +85 Celsius)
⦁ Full load temperature rise: 45 Celsius
⦁ Noload current: 25mA
⦁ Load regulation: ± 0.5%
⦁ Voltage regulation: ± 0.5%
⦁ Dynamic response speed: 5% 200uS
⦁ Short circuit protection: No
⦁ Input Reverse Polarity Protection: No -
LM1117 3.3V OUTPUT BREAKOUT BOARD BREADBOARD POWER SUPPLY
Input 4.7V – 10V
Output 3.3V
The Pin header is not yet solder, this has to be done by yourself. -
LM2596 DC TO DC 3A STEP DOWN MODULE WITH VOLTAGE DISPLAY
⦁ With a voltage meter and voltmeter can display self-calibration. It uses a more advanced microcessor voltage, voltage meter error 0.05V , Range 0 ~ 40V .? To ensure the accuracy of the voltmeter, please ensure that the input voltage 4.5V the above
-
STEP DOWN DC-DC ADJUSTABLE VOLTAGE REGULATOR 3A OUTPUT
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer for adjusting output voltage, capable of driving a load up to 3A with high efficiency. When the output current required is greater than 2.5A(10W) an external heatsink is suggested.
-
STEP DOWN DC-DC ADJUSTABLE VOLTAGE REGULATOR 5A (XL4015E1 BASED)
⦁ Rectification method: Non-isolated Buck
⦁ Mode of rectification: Non-synchronous rectification
⦁ Input voltage: 5V-32V
⦁ Output voltage: 0.8V-24V
⦁ Output current: maximum 5A (need to add heatsink when working above 3.5A)
⦁ Conversion efficiency: maximum 90%
⦁ Output Ripple: <30mV
⦁ Switching frequency: 300KHz
⦁ Load Regulation: ±0.5%
⦁ Voltage Regulation: ±2.5%
⦁ Operating temperature: Industrial grade(-40°C to +85°C ) -
STEP UP DC-DC ADJUSTABLE VOLTAGE REGULATOR 4A OUTPUT
⦁ Module Properties: non-isolated step-up (BOOST) switching regulator
⦁ Rectification: Non-Synchronous Rectification
⦁ Input voltage: DC 3.0 – 32V
⦁ Output Voltage: Adjustable 5.0 – 35V DC
⦁ Output Current: max. 4A
⦁ Conversion efficiency: Up to 94% (Output voltage higher, the higher the efficiency)
⦁ Voltage regulation: 0.5%
⦁ Load regulation: 0.5%
⦁ Switching Frequency: 400KHz
⦁ Output Ripple: 50mV (the higher the voltage, the greater the current, the greater ripple)
⦁ Operating temperature: Industrial grade (-40 to +85°C) (output power 18W or less)
⦁ Size: 43mm x 21 mm x 14mm
Categories
- Arduino Board
- Internet of Things
- Measurement Tools
- Motor
- Motor Driver
- Power Supply
- Programmer
- RaspBerry PI
- Wireless Solution
- Accelerometer
- Biomedical Sensor
- Camera Module
- Sensor
- Color Sensor
- Current Sensor
- Finger Print Sensor
- Flex Sensor
- Force Sensor
- Gas Sensor
- Gyroscope
- Heart Beat Sensor
- IR Distance Sensors
- Laser Module
- Light Sensor
- Line Sensor
- Magnetic Sensor
- Magneto Meter
- Motion Sensor
- Object Sensor
- Pressure Sensor
- Sensor Switch
- Sound Sensor
- Wireless Solution
- Temperature & Humidity
- Touch Sensor
- Ultrasonic Sensor
- Vibration Sensor
- Voice Sensor Module
- Water & Moisture
- Water Flow Sensor